Stonet Switch Poe P116GH 16 FE POE+2GE Uplink

Description

Stonet P116GH is a 18 Ports standard POE switch that provides 16 FE POE ports , 2 Gigabit Up-link ports and 1 SFP fiber port. Ports 1~16 features POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable. 2 Gigabit uplink ports ensure a smooth transmission for NVR or up-link routers. P116GH is a most economical solution for HD security network.

• Supporting 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T；

• Supports POE IEEE 802.3af/at compliant Powered Device (PD)

• Modes: Normal switch mode/Extended mode(Port1-16:250Metres ultra-long transmission)

• Ports 1~16 features POE power supply capability and can be used as Power over

Ethernet devices；2*10/100/1000Base-T Uplink and 1*1000Base-X SFP.

• Support full duplex based on IEEE802.3x and half duplex based on Backpressure

• Auto MDI/MDIX crossover for all ports

• Support non-blocking wire speed forwarding

• MAC address auto-learning & auto-aging

• Steel case, the total POE power budget of 240W

• Just Plug and Play

Reviews

There are no reviews yet.

Be the first to review “Stonet Switch Poe P116GH 16 FE POE+2GE Uplink”

Hardware
Interface	16×10/100Mbps POE ports（Data/Power） 2×10/100/1000Mbpsuplink RJ45 ports (Data) 1×1000MbpsSFP slot ports (Data)
Basic function	Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging
Standards	IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control
Mode	Normal switch mode
Data Transfer Rate	Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex) Gigabit Ethernet :2000Mbps(Full-duplex)
Store & Forwarding	Yes
Switching Capacity	9.2G
MAC Address Table Size	8K
Jumbo Frame	2048 byte
Environment	Operation Temperature：0℃～40℃ Storage Temperature：-40℃～70℃ Operation Humidity：10%～90% RH Non-condensing Storage Humidity：5%～90% RH Non-condensing
Power Input POE Standards	Single port maximum power 30W, Whole switch maximum power 240W Support over-current,over-voltage and short-circuit protection Support Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36- AC 110~240V 50/60HZ
Cabling type	1000Base-TX: Cat 5e or better UTP/STP(≤100m) 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m)
Dimensions (L x W x H )	220mm180mm43mm